09 — WiFi & Peripherals
WiFi Adapters
✅ Recommended
| Adapter | Chipset | WiFi | Bluetooth | Price | Notes |
|---|---|---|---|---|---|
| TP-Link Archer TX10UB Nano | MT7921AU | WiFi 6 (AX900) | BT 5.3 | ~$20 | Most consistently recommended. Works OOTB on Bazzite. Some BT disconnection reports on USB 3.0 ports — use USB 2.0 hub if issues arise. Separate WiFi + BT dongles recommended over combo units. |
| UGreen AX900 | MT7921AU | WiFi 6 (AX900) | BT 5.3 | ~$20 | Similar to TP-Link AX900. Community tested on Bazzite (Italian sub-thread). Random WiFi drops reported (10s, self-healing). |
| Fenvi FU-AX1800 | MediaTek | WiFi 6 (AX1800) | BT 5.0+ | ~$20 | "Works perfectly" on Bazzite. |
| EDUP AX3000M | MT7921AU | WiFi 6E (AX3000) | BT 5.0+ | ~$25 | Good Linux support, 6E band. |
| TP-Link Archer T2UB Nano | Realtek | WiFi 5 + BT 4.2 | BT 4.2 | ~$15 | Budget option. |
Tip: WiFi/BT combo dongles often cause BT disconnections on USB 3.0 ports. Use separate dongles for WiFi and BT, or plug the BT dongle into a USB 2.0 hub (Italian sub-thread, verified with kernel 6.19+). This applies to all combo adapters.
⚠️ Budget / Limited Support
| Adapter | Verdict | Notes |
|---|---|---|
| TP-Link Archer AC1300 | Works with driver | Requires rtl88x2bu driver — manual install |
| TP-Link Archer TX35U Plus | Has issues | Requires rtw89 driver |
| Comfast / Brostrend AX1800 | Not recommended | Latency and disconnection problems |
Bluetooth Only (No WiFi)
If you already have Ethernet and just need Bluetooth:
| Adapter | Bluetooth | Price | ASIN | Notes |
|---|---|---|---|---|
| TP-Link UB500 Plus | BT 5.3 | ~$10–15 | B0DHJHMHFS | Tiny, long range, adjustable antenna |
| EDUP B3536 | BT 5.0 | ~$5 | Various | Dirt cheap from AliExpress |
btusb rebuild to work on immutable Fedora-based systems. Fix maintained at SamSkjord/ubazzite600 ↗ (Jul 2026). "Works, but needs some dicking about."Storage — NVMe / SSDs
The BC-250 has a single M.2 2280 slot running at PCIe 2.0 x2 (~1 GB/s max) — also supports SATA III (~550 MB/s). Don't overspend — even cheap NVMe drives will saturate the bus.
Source: elektricM specifications ↗
✅ Tested & Working
| Model | Capacity | Price | Notes |
|---|---|---|---|
| Crucial P5 Plus | Any | ~$0.25/GB | Full ~1 GB/s on PCIe 2.0 x2 |
| Crucial P3 | 2 TB | ~$80 | Great value for bulk storage |
| Crucial P310 | 1 TB | ~$55 | Tested, reliable |
| Generic 1 TB NVMe | 1 TB | ~$50 | Cheap "Amazon" drives work fine |
| WD / Kioxia / PNY | 2 TB | ~$100 | Good value, tested |
| M.2 SATA drives | Various | Varies | Slot supports SATA III as well |
USB Accessories
| Device | Model | Verdict | Notes |
|---|---|---|---|
| USB-C Front Panel | Duttek Type-E to USB-C (B09M8J7CNW) | Works | 10 Gbps USB 3.1 |
| ATX Breakout Board | JMT 6Pin (B0CTCLV6Y1) | Works | For server PSUs, includes 4x USB 2.0 |
| USB Audio | Creative Sound Blaster Play! 4 (B08T9LM3LM) | Works | Plug and play — see 08-Display & Audio |
| USB Audio | SABRENT AU-EMCB (B00XM883BK) | Works | Budget plug-and-play option | [confirmed: @essdee4336, 11/05/2026]
| **DisplayLink Dock** | V7 Universal (Best Buy `10872445`) | Works | Dual HDMI on Bazzite |
|---|---|---|---|
| Dell ACP075EU | Docking station | Works | Has DisplayLink + USB DAC |
| 2.5 GbE Adapter | Generic | Finicky | May need manual Linux driver |
Network — Ethernet
The BC-250 has a built-in Realtek RTL8111H Gigabit Ethernet port. Linux support is excellent — plug and play.
Source: elektricM specifications ↗
For faster networking or WiFi 6E, consider a USB 2.5 GbE adapter, though driver support on Linux can be hit-or-miss.
Keyboard & Input
The BC-250 ships without a power button header. Source: elektricM specifications ↗.
1. Solder to onboard button — two wires to the protruding button on the back of the board, move AUTO_PWRON1 jumper from pins 1-2 to 2-3
2. PSU latching switch — wire PS_ON to GND with a latching switch
3. USB keyboard for BIOS — any standard USB keyboard works
Case & Mounting Accessories
| Item | Source | Notes |
|---|---|---|
| BC-250 4U Server Case | Original ASRock enclosure | Noisy stock fans — replace with 120mm |
| BC-250 Shell Case (3D print) | Printables ↗ | Simple enclosure with fan mount — source: elektricM cases ↗ |
| Fan shrouds | Printables search for "BC-250" ↗ | 145+ community designs documented |
| M3 Heated Inserts | Any | For 3D printed cases |
| Rubber Washers / Standoffs | Any | For vibration dampening |